Hot applied roofing solutions can be divided into two main groups: hot melt and mastic asphalt. Hot melt roofing systems are self-healing membranes created when a hot liquid is applied to the prepared structural surface. Mastic asphalt comes in a variety of formulations that use advanced polymer technology and is applied by traditional methods in two coats.
Heat is required for other types of roofing applications. These include pour and roll, torch on and hot air welded roofing systems.
Mastic asphalt is one of the oldest construction and waterproofing membrane solutions made popular because of its durability and reliable performance. Modern variations are formulated to extend the life of the mastic asphalt and make it applicable to the demands of modern construction and environmental protection. IKO PLC achieved the CarbonZero standard in 2007.
Hot melt roofing systems are manufactured from a combination of refined bitumen, synthetic rubbers, fillers and other additives. This gives the finished monolithic membrane long lasting waterproofing integrity ideal for most new build flat roof applications with suitable protection layer. This includes those designed and constructed to achieve zero falls.
The waterproofing layer is usually unaffected by standing water, dilute acids and fertiliser, and some formulas allow for root control which lends itself to specification for inverted and green roofs. The use of a combination of materials means some hot melt roof systems contain a high proportion of recycled content.
Modern mastic asphalts are specially formulated to include synthetic bitumen, and some include advanced polymer technology to offer improved durability, temperature stability and fatigue resistance and to make the installation easier. The solution is suitable for flat roofs with pitches up to 10°, and with modifications to the application, can be used for slopes over 30° and curved surfaces. Mastic asphalt can be used on most roof decks, whether concrete, timber or profile metal. The typical specification is for insulated warm roofs, un-insulated cold roofs and inverted roofs. Application for both extensive and intensive green roofs is common as the waterproof membrane can last for the design life of the roofing system.
IKO products are manufactured in the UK from responsibly, and where possible, locally sourced materials in order to reduce our carbon footprint and help with the sustainability of your project. The majority of our roofing systems are also BBA certified.
Family Owned
Full Range of Roofing Solutions
UK Manufactured
Techncial Support
Air Care Technology – ingenious mineral finish helps purify harmful gases in the atmosphere
Life expectancy in excess of 30 years
Patented IKO “Turbo Profile” for a faster and more secure installation
Polymer modified mastic asphalt roofing available to IKO approved installers only
Improved flexibility, fatigue resistance and long-term performance
BBA approved (Certificate No. 89/2299)
BBA Approved (Cert No.03/4009)
Less waste to control and dispose of – Zero waste packaging
BBA Approved (Cert No.03/4009)
Environmentally friendly – made with recycled content
Less waste to control and dispose of – Zero waste packaging
Hot Melt
Tough and resistant to impact damage thanks to its high…
Easily recyclable
Excellent low temperature flexibility
Bituminous Felts
Achieves FLL 4-Year Root Penetration Test
Purpose made roof garden waterproofing cap sheet
Specifically formulated ‘Anti-Root’ coating
Bituminous Felts
Achieves FLL 4-Year Root Penetration Test
Purpose made roof garden waterproofing cap sheet
Specifically formulated ‘Anti-Root’ coating
General purpose polymer modified mastic asphalt roofing available to all mastic asphalt installers
Enhanced flexibility and laying qualities across a wide temperature range
Complies with BS EN 12970:2000
General purpose and economical mastic asphalt roofing available to all mastic asphalt installers
Complies with BS EN 12970:2000
Long term durability with resistance to movement
High performance/rapid installation
Unique Turbo-Flow SBS modified bitumen coating
“Quick Torch” rapid dispersal backing film
Bituminous Felts
BBA certified (91/2671), durability of at least 25 years
Robust membrane with excellent tensile strength, elongation and tear resistance
SBS elastomeric bitumen coating (low temperature flexibility -20°C)
Bituminous Felts
Classified BROOF(t4) in accordance with BS EN 13501-5: 2005 fire classification,…
BBA certification (91/2671) – durability with service life in excess of 30 years
IKO Prevent Graphite Fire Wall Technology with self-extinguishing properties
Bituminous Felts
Classified BROOF(t4) in accordance with BS EN 13501-5: 2005 fire classification,…
IKO Prevent Graphite Fire Wall Technology with self-extinguishing properties
Low temperature flexibility down to -30°C
180g/m2 polyester based bitumen membrane
Protection layer within the IKO Permatec System
BBA approved (Certificate No. 03/4009)
Fire Performance achieving BS 476: Part 3: FAA
Completely seamless waterproofing
Long term durability with high fatigue resistance
Fast-Track Application – avoids extended curing time associated with wet screeds
Can be trafficked or covered as soon as it has cooled to ambient temperature
Delivered Directly to Site in Purpose-Built Hot Charge Transporters
Suitable for levelling uneven flat roofs to eliminate ponding on Roofs, Balconies, Walkways, Car…
Easily creates a wide range of drainage falls in line with BS 6229
Can be walked on and waterproofed approximately one hour after installation
Suitable for levelling uneven flat roofs to eliminate ponding on Roofs, Balconies, Walkways
Easily creates a wide range of drainage falls in line with BS 6233
Can be walked on and waterproofed approximately one hour after installation
Suitable for Levelling Uneven Flat Roofs to Eliminate Ponding
Easily Creates a Wide Range of Drainage Falls in line with BS 6231
Zero water content means no waiting for moisture to evaporate and eliminates the risk…
Achieves FLL 4-Year Root Penetration Test
Purpose made roof garden waterproofing cap sheet
Specifically formulated Anti-Root coating
Classified BROOF(t4) in accordance with BS EN 13501-5: 2005 fire classification, enables unrestricted use…
Low temperature flexibility down to -30°C
High SBS polymer content coating bitumen
