IKO Challenger P&R Cap Sheet
Key Benefits to your project
Traditional pour & roll application
Green or blue/ grey surface finish
Tough 180g/m² or 250g/m² polyester base options
HomePour and Roll
Pour and Roll
(Merchants & Resellers ONLY)
Pour and Roll
Pour and roll roofing application uses reinforced bitumen roofing membranes that are fully bonded to the substrate with a hot bonding bitumen at around 240°C. The installation process typically requires two operatives, one pouring the hot bitumen and one rolling the membrane into the hot bitumen.
Bitumen roofing membranes have polyester bases for toughness and durability and consist of either oxidised or styrene-butadiene-styrene (SBS) modified bitumen coating with strong sealing qualities. The application of pour and roll roofing solutions is suitable for warm, cold and inverted roofs of both domestic and commercial buildings.
The reinforced bitumen membranes provide a waterproof and weathertight finish that can accept minor structural movements without cracks or other damage. The high resistance to tearing and robustness can accommodate installation and maintenance traffic. If regular foot traffic is envisaged, this can be included through the installation of specifically designed walkways.
Pour and roll roofing felts and membranes can be used in conjunction with a wide range of insulation. They can be installed as air vapour control layers (AVCLs), cap sheets in a variety of colours, or underlay for a range of roof build-up systems. Pour and roll products are sought out because they form an exceptionally strong bond to the substrate, which makes them a durable and reliable roofing solution choice. The resulting roof systems are cost effective, with a life expectancy of approximately 20 years.
What are the benefits of pour and roll?
- Reliable and strong bond to the substrate
- Highly durable, long term cost effective roofing solution
- High level of dimensional stability
- Able to accept minor structural movements
- High tear and resistance and burst strength
- Resistant to wind loads and light roof foot traffic
- Economical roofing solution
IKO products are manufactured in the UK from responsibly, and where possible, locally sourced materials in order to reduce our carbon footprint and help with the sustainability of your project. The majority of our roofing systems are also BBA certified
Why Choose IKO?
Family Owned
Full Range of Roofing Solutions
UK Manufactured
Techncial Support
IKO Challenger SBS P&R Capsheet
Key Benefits to your project
Traditional pour & roll application
Green surface finish
Tough 180g/m² or 250g/m² polyester base options
IKO Easymelt Bonding Bitumen
Key Benefits to your project
High quality general purpose hot bonding bitumen
Melt away packaging – less waste to clear up
Easy to use 10kg shrink wrapped blocks
IKO Glass Fibre Underlay 3B
Key Benefits to your project
Formerly BS 747: 2000 Type 3B
British Standard glass-fibre based
Economic roofing materials
IKO SBS Premium T-O Underlay
Key Benefits to your project
Can be applied all year round as less affected by weather/temperature variations
Provides a strong robust base material
Retains excellent flexibility under ambient temperature fluctuations for enhanced system longevity
IKO SBS Standard Torch-On Underlay
Key Benefits to your project
Can be applied all year round as less affected by weather/temperature variations
Provides a strong robust base material
Retains excellent flexibility under ambient temperature fluctuations for enhanced system longevity
IKO Trade Top Sheet
Key Benefits to your project
Traditional product
Economy roofing materials
Nail fixing, cold adhesive or pour and roll bitumen application
