IKO enertherm ALU PIR Insulation Board

IKO-enertherm-House-Image

IKO enertherm ALU PIR Insulation Board

IKO-enertherm-House-Image

IKO enertherm ALU PIR Insulation Board

IKO enertherm PIR Micro Cell Technology

IKO enertherm ALU Insulation Board

Product documents

Literature

TDS - Technical Datasheet

IKO enertherm ALU Insulation Board

MSDS - Material Safety Data Sheet

IKO Enertherm Insulation Boards MSDS V1

Case Studies

BBA Certification

Add to wishlist or send enquiry

Category: Insulation
Sector of Application: Basement, Cladding, Flat, Pitched, Cavity Wall, Floor, Loft, Interior

Product Type: Insulation, PIR – Insulation

Product Information

IKO enertherm ALU PIR Insulation Board is a multi-functional 100% CFC, HCFC or HFC-free insulation board with a rigid polyisocyanurate foam core, clad on both sides with a multi-layer gas-tight aluminium construction. This high-quality reflecting ALU cladding consists of no fewer than seven layers, combined into a single construction. It is tested under extreme conditions regarding water absorption, mechanical properties, corrosion resistance and emissivity.

More detailed information can be found on the IKO enertherm website

Features and Benefits

Multi-functional PIR insulation board
Covered with a multi-layer gas-tight aluminium construction on both sides
Top quality multi layer lamination
Micro Cell Technology
BBA approved (Certificate No. 15/5283)

Colour: Silver

Product Finish: Aluminium Multi Layer Lamination
Project Type: Commercial Large, Commercial Medium, Commercial Small, Domestic Large, Domestic Medium, Domestic Small

BBA Certificate BBA 15-5283

Product documents

Literature

TDS - Technical Datasheet

IKO enertherm ALU Insulation Board

MSDS - Material Safety Data Sheet

IKO Enertherm Insulation Boards MSDS V1

Case Studies

BBA Certification

IKO enertherm ALU Insulation Board

SKU	Width mm	Thickness mm	Length mm	Product colour	Product finish
31025370	1200	70	1200	Silver	Aluminium Multi Layer Lamination
31020040	60	40	1200	Silver	Aluminium Multi Layer Lamination
31020030	60	30	1200	Silver	Aluminium Multi Layer Lamination
31020050	60	50	1200	Silver	Aluminium Multi Layer Lamination
31020060	60	60	1200	Silver	Aluminium Multi Layer Lamination
31020070	60	70	1200	Silver	Aluminium Multi Layer Lamination
31020080	60	80	1200	Silver	Aluminium Multi Layer Lamination
31020090	60	90	1200	Silver	Aluminium Multi Layer Lamination
31020100	60	100	1200	Silver	Aluminium Multi Layer Lamination
31020120	60	120	1200	Silver	Aluminium Multi Layer Lamination
31020140	60	140	1200	Silver	Aluminium Multi Layer Lamination
31025330	1200	30	1200	Silver	Aluminium Multi Layer Lamination
31025340	1200	40	1200	Silver	Aluminium Multi Layer Lamination
31025350	1200	50	1200	Silver	Aluminium Multi Layer Lamination
31025360	1200	60	1200	Silver	Aluminium Multi Layer Lamination
31025380	1200	80	1200	Silver	Aluminium Multi Layer Lamination
31021090	1000	90	1200	Silver	Aluminium Multi Layer Lamination
31025400	1200	100	1200	Silver	Aluminium Multi Layer Lamination
31021110	1000	110	1200	Silver	Aluminium Multi Layer Lamination
31025420	1200	120	1200	Silver	Aluminium Multi Layer Lamination
31025440	1200	140	1200	Silver	Aluminium Multi Layer Lamination
31028025	1200	25	2400	Silver	Aluminium Multi Layer Lamination
31028030	1200	30	2400	Silver	Aluminium Multi Layer Lamination
31028040	1200	40	2400	Silver	Aluminium Multi Layer Lamination
31028050	1200	50	2400	Silver	Aluminium Multi Layer Lamination
31028060	1200	60	2400	Silver	Aluminium Multi Layer Lamination
31028070	1200	70	2400	Silver	Aluminium Multi Layer Lamination
31028075	1200	75	2400	Silver	Aluminium Multi Layer Lamination
31028080	1200	80	2400	Silver	Aluminium Multi Layer Lamination
31028085	1200	85	2400	Silver	Aluminium Multi Layer Lamination
31028090	1200	90	2400	Silver	Aluminium Multi Layer Lamination
31028100	1200	100	2400	Silver	Aluminium Multi Layer Lamination
31028110	1200	110	2400	Silver	Aluminium Multi Layer Lamination
31028120	1200	120	2400	Silver	Aluminium Multi Layer Lamination
31028140	1200	140	2400	Silver	Aluminium Multi Layer Lamination
31028150	1200	150	2400	Silver	Aluminium Multi Layer Lamination
31029040	1200	150	1200	Silver	Aluminium Multi Layer Lamination
31029080	1200	90	1200	Silver	Aluminium Multi Layer Lamination
31029100	1200	110	1200	Silver	Aluminium Multi Layer Lamination
31029550	45	50	1200	Silver	Aluminium Multi Layer Lamination
31029575	45	75	1200	Silver	Aluminium Multi Layer Lamination

Features and benefits

Multi-functional PIR insulation board
Covered with a multi-layer gas-tight aluminium construction on both sides
Top quality multi layer lamination
Micro Cell Technology
BBA approved (Certificate No. 15/5283)

IKO enertherm ALU PIR Insulation Board is a multi-functional 100% CFC, HCFC or HFC-free insulation board with a rigid polyisocyanurate foam core, clad on both sides with a multi-layer gas-tight aluminium construction. This high-quality reflecting ALU cladding consists of no fewer than seven layers, combined into a single construction. It is tested under extreme conditions regarding water absorption, mechanical properties, corrosion resistance and emissivity.

More detailed information can be found on the IKO enertherm website

Accreditations

BBA Certificate

Product attributes

EDGE FINISH: Straight

Questions and answers for this product…

Q Builders left it out in the rain can it still be used? answer now

A
It’s hard to say, if it’s been left out for a long period of time (weeks) and they have been soaked through then no. Our guidelines for storage can be found in our IKO enertherm ALU Insulation for Flat Roofs here.
Q Is this suitable as structural floor insulation i.e between 100mm concrete slab and 60mm screed? ... answer now

A
Yes, IKO enertherm ALU is suitable for a floor application. Please find BBA & TDS for further information.

https://products.enertherm.eu/index.php?/products/download/18/en/I
http://www.bbacerts.co.uk/CertificateFiles/52/5283%20ps1i1.pdf
Q can this be painted ? answer now

A
Usually when installing IKO enertherm ALU, the insulation is sandwiched within a build-up and therefore not exposed to the elements. As a result we have not performed any testing on our insulation where we have applied paint to the surface of the board.
Q Do the enertherm PIR Insulation Board conform to fire performance class 1 (bs 476 part 7) Thanks ... answer now

A

Yes IKO Enertherm ALU Insulation does, please see IKO Enertherm ALU Insulation technical datasheet > https://www.ikogroup.co.uk/downloads/download-info/iko-enertherm-alu-tds-pdf/
Q How do you store IKO enertherm ALU Insulation? Can it be left exposed to the elements? answer now

A
The IKO enertherm ALU Insulation is delivered to site in packs, wrapped in polythene. The IKO enertherm ALU Insulation must be protected from prolonged exposure to sunlight, and should be stored under cover or protected with opaque polythene sheeting. Where possible, packs should be stored inside. If stored outside, the product should be stacked flat, and raised above ground level and not in contact with ground moisture. The IKO enertherm ALU Insulation must not be exposed to open flame or other ignition sources, or to solvents or other chemicals.
Q Is this suitable for concrete slab floor as the BBA certificate indicates that it isn't? answer now

A Yes it is approved for use under floors. Please see attached technical datasheet IKO Enertherm ALU TDS and BBA for floors.BBA 15_5283 ALU Floor boards Mar2016
Q Where can I find information on the insulation properties of your boards so I can compare the ben... answer now

A
All the information can be found on the specific product page, in the IKO enertherm brochure and through our IKO Technical Department: enertherm.technical.uk@iko.com
Q My architect has specified wingspan k7 northern 120mm thick. Is your product an appropriate equi... answer now

A The IKO enertherm PIR Insulation Boards are not an equivalent to this type of insulation. For further information on the IKO enertherm range please contact the IKO Technical Department who will happily assist you. enertherm.technical.uk@iko.com 01257 256 864
Q Is this suitable for a flat warm roof for a new square bay window? answer now

A
Yes IKO enertherm ALU is suitable for this type of application. However, we would only recommend using at least 80mm thick IKO enertherm ALU PIR Insulation board. Please seek further guidance in regards to the correct way to install by contacting the IKO Technical Department on 01257 256 864 or email technical.uk@iko.com