IKO enertherm XPS Insulation Board
Product documents
TDS - Technical Data Sheet
Literature
BBA Certification
Category: Insulation
Sector of Application: Flat
Product Type: Insulation, XPS – Insulation
Product Information
Description
IKO enertherm XPS is a rigid extruded polystyrene (XPS) board with a Global Warming Potential (GWP) of less than five and achieves a BRE certified Green guide rating of A+ and A, depending on density. A lightweight, lap jointed board with high compressive strength and performance, thermally bonded tri-laminate of polypropylene, spun bonded (outer layers) and microporous (inner layer). Thermal performance of an inverted roof is improved when used in conjunction with IKO enertherm WCL. Used for the thermal insulation of a wide variety of flat roofs including an inverted roof below ballast or paving slabs or a green/garden roof.
Features and Benefits
- Excellent thermal performance
- High compressive strength
- Highly resistant to water absorption
- Able to resist repeated freeze/thaw cycles
- Lightweight and easy to install
- Tough and durable, not easily damaged
- Dimensionally stable
- BBA approved (Certificate No. 17/5467)
Colour: Light Orange
Product Finish: Rigid Extruded Polystyrene
Project Type: Commercial Large, Commercial Medium, Commercial Small
IKO enertherm XPS Insulation Board
| SKU | Width mm | Thickness mm | Length mm | Product colour | Product finish | Unit of pressure kpa |
| 30400050 | 600 | 50 | 1250 | Light Orange | Rigid Extruded Polystyrene | 300 |
| 30400070 | 600 | 70 | 1250 | Light Orange | Rigid Extruded Polystyrene | 300 |
| 30430100 | 600 | 100 | 1250 | Light Orange | Rigid Extruded Polystyrene | 300 |
| 30400130 | 600 | 130 | 1250 | Light Orange | Rigid Extruded Polystyrene | 300 |
| 30400160 | 600 | 160 | 1250 | Light Orange | Rigid Extruded Polystyrene | 300 |
| 30400180 | 600 | 180 | 1250 | Light Orange | Rigid Extruded Polystyrene | 300 |
| 30400200 | 600 | 200 | 1250 | Light Orange | Rigid Extruded Polystyrene | 300 |
| 30400220 | 600 | 220 | 1250 | Light Orange | Rigid Extruded Polystyrene | 300 |
Features and benefits
- Excellent thermal performance
- High compressive strength
- Highly resistant to water absorption
- Able to resist repeated freeze/thaw cycles
- Lightweight and easy to install
- Tough and durable, not easily damaged
- Dimensionally stable
- BBA approved (Certificate No. 17/5467)
IKO enertherm XPS is a rigid extruded polystyrene (XPS) board with a Global Warming Potential (GWP) of less than five and achieves a BRE certified Green guide rating of A+ and A, depending on density. A lightweight, lap jointed board with high compressive strength and performance. Thermal performance of an inverted roof is improved when used in conjunction with IKO enertherm WCL. Used for the thermal insulation of a wide variety of flat roofs including an inverted roof below ballast or paving slabs or a green/garden roof.
Accreditations
Product attributes
EDGE FINISH: Rebate
Questions and answers for this product…
-
Q Hi, could you please confirm the Green Guide Rating and element number for this insulation? Thanks answer nowA
The bre Green Guide Rating for the IKO enertherm XPS is A+ and A, depending on density.
-
Q Hi please could you giver me the compressive strength for your Enetherm XPS insulation. 180 mm th... answer nowA
IKO enertherm XPS has a compressive strength of 300kpa, but when we are asked to assess the impact of loading on the product, a factor of safety of 2.50 is employed as this is commonly used by the British Board of Agrément (BBA).
Therefore, if it can be shown that the loading will not exceed 120kpa, it will be suitable. If loading's are likely to exceed this figure, then we have an alternative “Super” grade, which is a 500kpa board and can accept loadings of 200kpa.
-
Q Hi, could you please confirm the thermal conductivity for this insulation, we have it installed ... answer nowA
0.033 W/mK declared, but for U-Value calculations we use a design lambda which is ≥ 100mm - 0.034W/mK, and < 100mm - 0.035W/mK
