IKO Metatech Warm Roofing System
In IKO Metatech Systems, the waterproofing consists of a two-component liquid waterproofing product based on PMMA. The waterproofing product is applied quickly, as the second layer is applied wet-on-wet to the first layer and cures quickly in just 45 minutes. The IKO Metatech Systems are thus ideal for surfaces that need to be released quickly.

Key Benefits to your project
Fast installation: wet-on-wet
Fast curing – fast release
Installation possible under less good weather conditions
IKO Metatech Warm Roofing System Typical System Build Up
A two-component coating based on methacrylates that cures after the hardener powder has been incorporated. Apart from fast curing (after only 45 minutes), IKO Metatech is also characterised by rapid installation, as the second layer is applied wet-on-wet to the first layer.
Download Product ResourcesA reinforcement fleece consisting of non-woven polyester with a density of 110 g/m². This fleece is rolled out in the first wet layer of IKO Metatech and pressed, and provides the strength, stability and penetration resistance of the system. As the IKO Metatech Roof System can withstand continuous water stagnation and pressure, it is also ideal for sealing ponds, fountains and private swimming pools.
Download Product ResourcesThe underside has a self-adhesive bitumen coating that provides a 40% partial bond allowing vapour dispersion between the membrane and substrate. The underside of the IKO system H-A Underlay has a 75mm selvedge that is facilitates a rapid installation of the lap joints. The self-adhesive coating is protected by a release film.
Download Product ResourcesIKO Systems SA VCL is composed of a thick, impervious aluminium core, reinforced with a tough, polyester base and coated with a polymer modified bitumen. This coating is protected on the underside with a release film backing and the top surface has a fine mineral finish. A selvedge of 100mm width, protected by a release film provides a quick means of completing side laps.
Download Product ResourcesIKOpro Systems Bonding Agent is a fast drying primer for adhesion of self-adhesive bitumen roofing membranes. The solvent based primer, based on synthetic rubber and resins is specially formulated to activate self-adhesive bitumen roofing membranes to promote a strong bond even at low temperatures.
Download Product ResourcesIKOpro PU Adhesive for Insulation Boards meets the demand for a safe, effective and green solution to securely bonding insulation board to various roof substrates. It is solvent-free, non-flammable and low-odour. A high-foaming solvent-free PU adhesive specifically developed to securely bond a wide range of insulation boards.
Download Product ResourcesTechnical Information
Product Information
Product Type: Cold Applied Liquid - Commercial
Roof Build Ups: Warm Roof