
IKOpro High Performance Roofing Felt Adhesive
Product documents
Literature
MSDS - Material Safety Data Sheet
TDS - Technical Data Sheet
Category: Liquids & Compounds
Sector of Application: Adhesion, Flat
Product Type: Bituminous, Cold Applied Liquid
Product Information
- An adhesive for bonding roofing felt to concrete, metal, timber and similar surfaces and for bonding successive layers of roofing felt
- As a lap sealant when nailing felt to wooden roofs
- 1.0 – 1.5 m2/litre depending on substrate and ambient temperature (as gritting adhesive) 0.7 m2/litre for 12 mm and 1.0 m2/litre for 3 mm chippings
Colour: Black
Product Finish: Matt
Installation Method: Brush
Project Type: Commercial Medium, Commercial Small, Domestic Large, Domestic Medium, Domestic Small
IKOpro High Performance Roofing Felt Adhesive
SKU | Product colour | Product finish | Size l |
MW686231 | Black | Matt | 1 |
MW686232 | Black | Matt | 2.5 |
MW686235 | Black | Matt | 5 |
Features and benefits
- An adhesive for bonding roofing felt to concrete, metal, timber and similar surfaces and for bonding successive layers of roofing felt
- As a lap sealant when nailing felt to wooden roofs
- 1.0 – 1.5 m2/litre depending on substrate and ambient temperature (as gritting adhesive) 0.7 m2/litre for 12 mm and 1.0 m2/litre for 3 mm chippings
IKOpro High Performance Roofing Felt Adhesive is a cold-applied bitumen adhesive for bonding and sealing roofing felts. It is a bitumen adhesive which enables total bonding of roofing felts without the need for hot bitumen or flames. It is also ideal for sealing lap joints and for fixing chippings to the final layer for a built-up system.
Accreditations
Product attributes
Questions and answers for this product…
-
Q Can this product be used to bond a single layer of IKO Super Shed Felt to OSB3 boards directly in... answer nowA
IKOpro High Performance Roofing Felt Adhesive can be used to bond roofing felt to timber substrates, but there are a couple of things to bear in mind…
IKO Super Shed Felt is typically used as a single layer on boarded pitched roofs over non-habitable spaces and is normally mechanically fixed with overlaps sealed with IKOpro Felt Lap Adhesive. However, IKOpro Roofing Felt Adhesive could be used to strip bond the felt and for bonding overlaps instead. See technical datasheet for application guidance.
Should the roof in fact be flat i.e. less than 10 degrees in pitch, then really a two layer fully bonded system should be used, such as the IKO Trade Underlay and Top Sheet System.
Related products
Roofing
Liquids & Compounds
Liquids & Compounds
Liquids & Compounds
Liquids & Compounds
Roofing
Liquids & Compounds
Liquids & Compounds
Liquids & Compounds
Liquids & Compounds
Liquids & Compounds
Liquids & Compounds
Liquids & Compounds
Liquids & Compounds
Liquids & Compounds
Liquids & Compounds
Liquids & Compounds
Roofing
Liquids & Compounds
Liquids & Compounds
Liquids & Compounds
Liquids & Compounds
Liquids & Compounds
Liquids & Compounds
Roofing
Liquids & Compounds
Liquids & Compounds
Liquids & Compounds
Liquids & Compounds
Liquids & Compounds
Roofing
Liquids & Compounds
Liquids & Compounds