
IKOpro Universal Flat Roof Renovator
Product documents
Literature
MSDS - Material Safety Data Sheet
TDS - Technical Data Sheet
Category: Roofing, Liquids & Compounds
Sector of Application: Flat, Repair and Waterproofing
Product Type: Bituminous, Cold Applied Liquid
Product Information
- For existing roofs
- Metal roofs should be prepared with a wire brush
- Prime iron and steel with rust inhibitive primer
- 2.5 m²/litre/coat
Colour: Black
Product Finish: Matt
Installation Method: Brush
Project Type: Commercial Medium, Commercial Small, Domestic Large, Domestic Medium, Domestic Small
IKOpro Universal Flat Roof Renovator
SKU | Product colour | Product finish | Size l |
MW941500 | Black | Matt | 2.5 |
MW941622 | Black | Matt | 22.5 |
MW941600 | Black | Matt | 5 |
Features and benefits
- For existing roofs
- Metal roofs should be prepared with a wire brush
- Prime iron and steel with rust inhibitive primer
- 2.5 m²/litre/coat
IKOpro Flat Roof Renovator is a seamless waterproof coating to prolong the life of flat roofs. It is a flexible, bituminous coating containing reinforcing fibres and designed for easy application to protect and prolong the life of existing roofing systems.
Accreditations
Product attributes
Questions and answers for this product…
-
Q if you need to allow walking on it after, can you stick tiles to it or what would be best ? answer nowA
We would not advise walking over this product other than routine maintenance and would not advise bonding tiles to it.
If the proposed area is to be trafficked we would advise a robust roofing system is used and where possible tile or paving should be supported on suitable paving support systems. This product is designed to prolong the life of existing roofing system.
-
Q Hi Have just purchased ikopro flat roof renovator for my garage roof. Have stirred it well but fi... answer nowA
The IKOpro Universal Flat Roof Renovator has a fairy thick consistency during application as can be seen in the attached photograph. Should you be concerned that what you have received differs and therefore not as expected, by providing the 6 digit batch code (from the small white sticker found on the lid of the tin) to IKO Technical Services: technical.uk@iko.com they will be able to trace back to point of manufacture.
-
Q Is it safe to walk on the surface after it has been treated and would it be inadvisable to put a ... answer nowA
The IKOpro Universal Flat Roof Renovator can be walked on for minor roof access or applying further coats but we would not recommend it for regular traffic, or having table and chairs put on it.
-
Q Can this be used on a felt roof which has a few small cracks in it. Does it dry fully or remain t... answer nowA
As stated in the product datasheet under surface preparation: ‘Any blisters and cracks present in the existing roof surface should be repaired using IKOpro Roof Repair Compound.’
When the IKOpro Universal flat roof renvovator is fully cured it will be dry to the touch.
-
Q Can IKOpro Universal Flat Roof Renovator be painted over if I want a white finish to reflect the ... answer nowA
You cannot paint this product, not even with IKOpro Solar Reflective Aluminium Paint. UV protection in such instances would be achieved by casting roof chippings into wet the coating to provide UV protection to the renovated roof areas.
-
A
IKOpro Universal Flat Roof Renovator is a bitumen fibre reinforced bitumen compound for the renovation of bitumen roof coverings. The surface of the receiving bitumen substrate requires priming with IKOpro Quick Dry Bitumen Primer.
-
A
We do not recommend that IKOpro Universal Flat Roof Renovator (nor any of our liquids) be applied directly to asbestos sheeting for the following reasons:
- Preparation works such as brushing down prior to application may lead to asbestos becoming airbourne
- Asbestos is classified as a fragile deck so it would be unsafe to walk across to apply any system effectively
- The long term effects of freeze thaw from trapped moisture within the deck may cause the asbestos to crack or spawl -
A
The coverage rate of IKOpro Universal Flat Roof Renovator is 2.5m²litre and is applied in an even coating using a brush at a rate of 2.5m²/litre. Once dry (approximately 24 hours) a second coat is applied at right angles to the first at a rate of 2.5m²/litre.
Related products
Roofing
Roofing
Roofing
Roofing
Roofing
Roofing
Roofing
Roofing
Roofing
Roofing
Roofing
Roofing
Roofing
Roofing
Roofing
Roofing
Roofing
Roofing
Roofing
Roofing
Roofing
Roofing
Roofing
Roofing
Roofing
Roofing
Roofing
Roofing
Roofing
Roofing
Roofing